JPK Service Center
Latest Product Info
Next generation of the NanoWizard®
Highest AFM performance with full optical microscopy integration
Atomic Force Microscopy
Accessories for the NanoWizard® AFM (nanowizard accessories)
nanowizard accessoriesAccessories for the NanoWizard® AFM
Where performance meets flexibility
Optical systems/accessories, electrochemistry solutions, electrical sample characterization, environmental control options, software modules, temperature control, acoustic and vibration isolation solutions and more. - JPK provides you with the right accessories to control your sample conditions and to perform successful experiments.Vortis™ SPMControl station
- State-of-the-art digital controller with lowest noise levels.
- High speed 16bit AD conversion with 60 MHz for the photodetector signals
- 24bit ultra precise ADC with 2.5 MHz
Signal Access Module - SAM
Upgrade for the Vortis™ controller for more flexibility.
CellHesion® 200 system option
The single cell force testing solution for cell adhesion and elasticity studies.
BioMaterials Workstation BioMAT™
Completely integrated system comprising upright optical microscope and AFM.
DirectOverlay™ software module
Perfect integration of optical and AFM data – JPK‘s proprietary and patented solution for perfect overlay of optical and AFM information.
MicroRheology software module
For visco-elastic properties of living cells and other samples such as gels or foams.
KPM and SCM module
Kelvin Probe (KPM) and Scanning Capacitance (SCM) Microscopy module. Option for nanoscale mapping of surface potential distribution.
CAFM module with closed chamber
For experiments in inert atmosphere; for conductivity and I/V measurements on the nanoscale under controlled environmental conditions.
High Voltage Amplifier for sample biasing
Can be used for biasing a sample, e.g., in electro-optical experiments or in Piezo-Response Force Microscopy (PFM).
Motorized precision stage
Offers automatic motion control for precise positioning of the sample relative to optical axis and AFM probe.
Standard stage
Offers fine motion control for precise positioning of the AFM tip relative to the sample.
BioCell™ coverslip based liquid cell
Coverslip based fluid cell for Live Cell imaging and single molecule fluorescence with temperature control and perfusion
PetriDishHeater™
- for Live Cell imaging
- accomodates 35 mm Petri dishes even with glass bottom
High Temp. Heating system - HTHS™
- polymer science
- phase separation studies
- temperature range from ambient to 300°C
- resolution 0.1°C
- drift compensated design
Heating Cooling Stage - HCS™
Designed for AFM experiments in air or liquids from 0°C up to 100°C with minimized drift in all dimensions – HCS™ follows the same design criteria as HTHS™.
HCS™ with electrochemistry cell
Designed for electrochemistry AFM experiments with controlled heating and cooling of the sample.
JPK acoustic enclosure
Approved for high performance applications: acoustic hood from JPK for utmost stability and isolation.
TopViewOptics™
The optical system for non transparent samples or substrates such as HOPG, mica, ceramics, implants etc.
JPK sample holder for small samples
Adaptor for standard sample holder.
Holds magnetically fixed AFM metal stubs.
Holds magnetically fixed AFM metal stubs.
FluidicsModule™
JPK FluidicsModule™ with up to 8 different liquids such as buffer solutions
CCD cameras
JPK supplies CCD cameras from all major manufacturers, e.g., Andor® Technology, Jenoptik, The Imaging Source and IDS Imaging Development Systems.
Vortis™ Advanced SPMControl station
- State-of-the-art digital controller with lowest noise levels.
- 4 high speed 16bit ADC channels with 60 MHz
- 12 ADCs with 18bit with 800 kHz
- 24bit ultra precise ADC with 2.5 MHz
ForceRobot® 300 system option
The innovative force spectroscope with fully automated work flow.
TAO™ Tip Assisted Optics module
Specialized sample stage for advanced experiments combining AFM and optical spectroscopy.
CellHesion® module
The CellHesion® module combines the capabilities of the BioAFM with precise adhesion force measurements.
NanoLithography/NanoManipulation module
Software module for NanoWizard® systems.
Electrical sample connection module
Accommodates electrical conductive samples such as AFM metal stubs by magnetic fixation or transparent samples such as ITO coated glass coverslips.
Conductive AFM (CAFM) module
For conductivity and I/V measurements on the nanoscale.
STM module
The Scanning Tunnelling Microscopy (STM) module fits directly to the NanoWizard® head.
ForceWheel™
JPK‘s ForceWheel™ handheld accessory for most sensitive experiment control, e.g., for force spectroscopy.
Manual precision stage
Offers sub-micron resolution & fine motion control for precise positioning of the AFM tip relative to optical axis and the sample.
Cantilever holders
Standard holder for all-round applications with a large optical field of view, and Supercut version for use in air or liquids.
CoverslipHolder
- closed liquid cell with standard coverslip bottom
- high-N.A. immersion optics possible
- autoclavable
SmallCell™ small volume closed liquid cell
The perfect solution for smallest volume experiments in a hermetically sealed environment, two versions available for volumes <150µl and <60µl.
Heating Cooling Module - HCM™
Designed for heating and cooling experiments in gas or liquids with minimized drift in all dimensions.
ECCell™ electrochemistry cell
- works with transparent or non-transparent substrates
- temp. range from ambient to 60°C
- 500µL liquid volume
- flexible set of electrodes including miniature reference electrode
Vibration and acoustic isolation
from Accurion, Table Stable and TMC
JPK base for acoustic enclosure
Approved for high performance applications: base frame with top plate from JPK for utmost stability.
TopViewOptics™ with boom stand
The optical system for non transparent samples or substrates such as HOPG, mica, ceramics, implants etc. Can be used in combination with inverted microscopes.
Syringe pumps
from KD Scientific and World Precision Instruments (WPI)
Cantilevers, substrates and standards
The JPK platforms are compatible with all commercially available cantilevers.